COVID-19对运输和订单的影响

我们正在尽最大努力维护我们的运输时间表,但我们预计订单处理和运输可能会出现延误。感谢您的理解。

CalChip Connect

导航

菜单

ADMIN

FEB 24, 2022

Browan Merry IoT New Fast Sync Capability

Some Browan MerryIoT Helium Hotspot customers have reported slow sync times. Good news; Browan is pushing updates consistently and recent upgrades have included FASTSYNC capability, SD card features (via web interface), and LoRa radio improvements. However, if you find your miner is stuck at a certain block height for more than 72hrs, CalChip worked with Browan to create the tutorial below to execute a manual resync. **Please note, to perform this guide, you must be on the same local network as the MerryIoT Miner. Here’s what to do:

1. Identify the IP address assigned to your MerryIoT hotspot miner

You can do this with an IP scanner tool (such as “FING” on the iOS app store), or using your home router’s software. Once you’ve identified the IP address copy it or write it down. For example, mine was 192.168.1.xxx.

2. Navigate to your MerryIoT’s Web GUI

Using a PC or mobile device on the same local network the Miner is on, open a browser and type https://[your_IP_address] into the address bar. For example, https://192.168.1.xxx.

3. Check status and update your software 

You should now see your hotspot miner’s software, where you can:

a. Check for updates

b. Upgrade your miner to the latest firmware

c. Confirm the docker container is “Running” 

d. “Reset” the miner if necessary